logo

One stop supplier of VOCs treatment equipment

13824795166 Mr. Liang

这是描述信息

Zeolite concentration rotary drum device

Zeolite concentration rotary drum device

 

 

Principle Introduction:

The principle of molecular sieve rotary adsorption concentration and the principle of molecular sieve rotary adsorption concentration both utilize porous structures to adsorb organic waste gases. Under the action of the induced draft fan, the exhaust gas passes through the internal structure of the zeolite and is adsorbed and retained inside the zeolite; The exhaust gas is purified and transformed into clean gas, which is directly discharged. The zeolite rotary drum is divided into two zones: adsorption zone and desorption zone; During operation, Baote rotates slowly. When the rotary drum enters the desorption zone, a small air flow is heated by a heat exchanger to 150 ° -180 ° C, and the zeolite is blown and desorbed for regeneration; The low volume and high concentration exhaust gas detached immediately enters the subsequent treatment process, which can be adapted to direct combustion (TO), regenerative catalytic combustion (RCO), regenerative incineration (RTO), condensation recovery (CR) or other solvent recovery devices.

 

Product features:

1. Compact structure and small volume; Small footprint;

2. Modular assembly; Quick and easy installation;

3. Zeolite has a high content and a higher purification effect, reaching up to 98%;

4. High concentration ratio, concentration ratio 5-40 times;

5. No honeycomb ceramic substrate, lower specific heat capacity, no cooling zone;

6. Easy maintenance, no need for special auxiliary tools;

7. Automatic control, high degree of intelligence.

 

 

Applicable industries:

Widely applicable to industries such as painting, coating, packaging printing, electronics, shoemaking, and chemical engineering;

Applicable ingredients:

Applicable ingredients: benzene, toluene, xylene, styrene, ethane, MEK, MIBK, acetone, ethyl acetate, NMP, THF, methanol, ethanol, propanol-1C butanol and other waste gas components at room temperature, without self polymerization, with a boiling point below 200 ° C.

Suitable concentration range for processing: 10-1000ppm

 

未找到相应参数组,请于后台属性模板中添加